Changing the TV's Input
Normally, your TV displays the signal coming through the antenna terminal.
However, If you’
ve connected another component to your TV(such as a VCR) using
the Video/Audio input, you will want to be able to view the signal from the compo-
nent.
To do this, you will need to switch from the
‘ TV ’input to the
‘ Line ’Input, as fol-
lows.
1
With the TV on, press the MENU button twice, then
“ set-up ”menu will appear.
2
Use the ▲CH▼ buttons to select
“ Input ”
.
3
Press the ◀VOL▶ buttons to change from
‘ TV ’to
‘ Line ’
.
4
Wait 10 seconds, or press the MENU button to return to normal TV viewing.
When it connected an Video/Audio cable from the Video/Audio out jack on the VCR
to the Video/Audio in jack on the front your TV, and your TV’
s back panel at the
same time, the former takes precedence of the latter.
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input :
TV
Adjust
Next
1
Select
Set-Up
Language : English
Input :
Line
Adjust
Next
3
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input :
TV
Adjust
Next
2
14
Chapter 3:
Operating Your TV
