Changing the TV's Input
Normally, your TV displays the signal coming through the antenna terminal. However, If you
’
ve con-
nected another component to your TV(such as a VCR) using the Video/Audio input, you will want to be
able to view the signal from the component.
To do this, you will need to switch from the
‘
TV
’
input to the
‘
Line
’
Input, as follows.
1 With the TV on, press the MENU button twice, then
“
set-up
”
menu will appear.
2 Use the
▲
CH
▼
buttons to select
“
Input
”
.
3 Press the
◀
VOL
▶
buttons to change from
‘
TV
’
to
‘
Line
’
.
4 Wait 10 seconds, or press the MENU button to return to normal TV viewing.
When it connected an Video/Audio cable from the Video/Audio out jack on the VCR to the Video/Audio
in jack on the front your TV, and your TV
’
s back panel at the same time, the former takes precedence of
the latter.
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input :
TV
Adjust
Next
1
Select
Set-Up
Language : English
Input :
Line
Adjust
Next
3
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input :
TV
Adjust
Next
2
14
Chapter 3: Operating Your TV
