Daewoo DTH-25G1FST/FSP/FS, Service Manual

Page: 9 / 63

2) Select the S10 of service m ode to display item s, then press the V O L buttons on the rem ote control.
3) Press CH buttons on the remote control to select S M ANUAL and press VOL buttons on the remote control.
4) Press CH buttons on the rem ote control to select IN PUT LEVE L and press VO L buttons to set TP2
becom e 490m V(+20m V/-5m V).
5) Press the R ECALL button of rem ote control to store.
5. STEREO ADJUSTMENT
1) R eceive the Zenith M TS signal of 1KH z CH(L only).
2) C onnect scope at TP2 to verify Rout correspondent.
3) Select the S10 of service m ode to display item s, then press the V O L buttons on the rem ote control.
4) Press CH buttons on the remote control to select S M ANUAL and press VOL buttons on the remote control.
5) Press CH buttons on the remote control to select WIDEBAND and press VOL Buttons on the remote control.
6) Adjust w ith VO L buttons till the Rout(scope) becom e m inim um .
7) Press CH buttons on the remote control to select SPECTRAL and press VO L Buttons on the remote control.
8) Adjust w ith VO L buttons till the Rout(scope) becom e m inim um .
9) Press the RECALL button on the rem ote control to store.
6. FOCUS ADJUSTMENT
1) Receive the R ETM A PATTER N signal.
2) Adjust the FO C US VO LUM E of FBT to obtain the clearest picture
7. GEOMETRY
7-1. VERTICAL CENTER ADJUSTMENT
1) Receive the R ETM A PATTER N signal.
2) Set the user control AUTO P ICTUR E to STA NDARD m ode.
3) Select the S6 of service m ode to display item s, then press the VO L buttons on the rem ote control.
INPUT LEVEL 15
WIDEBAND 23
SPECTRAL 32
INPUT LEVEL 15
WIDEBAND 23
SPECTRAL 32
ALIGNMENT INSTRUCTIONS
INPUT LE VEL 15
W IDEB AND
23
SPEC TRAL 32
INPUT LEVEL 15
W ID EBAND
23
SP ECTRAL 32