screen displays “MELODY” again.
10. Press or to scroll to
“VOLUME”.
11. Press key and the screen
displays current volume of ring
tone, such as “VOLUME 3”
12. Press or to select the
proper ring volume (5 levels)
13. Press key to confirm the new
selection and a sound of “di du”
indicates a successful selection.
14. Press key to exit to standby
mode
56. KEYPAD TONE AND WARNING
TONE SETTING
1. While off-line, press key and
the screen displays “CALL LOG”.
2. Press or key to scroll to “HS
SETTINGS”.
3. Press key to confirm.
4. Press or key to scroll to
“TONE SETUP”.
5. Press key to confirm.
6. Press or to display either
“KEY TONE”, “BATTERY LOW” or
“RANGE ALARM”
KEY TONE SELECT
1. While “KEY TONE” is shown, press
key and the screen displays
either “ON” or “OFF”.
2. Press or to display “ON”
3. Press key to confirm and the
screen displays “KEY TONE” again.
4. Press key to exit to off-line.
BATTERY LOW WARNING TONE
Detailed setting step is similar to
that of setting the KEY TONE.
(
Note
: While talking, there will be a
“di” sound when the battery is low if
the ALARM is set to
ON. While off-line, there will be no
alarm sound; only battery capacity
symbol is displaying on
screen.)
OUT-OF-RANGE WARNING TONE
Detailed setting step is similar to
that of setting the KEY TONE.
(
Note
: While talking, there will be a
long “di” sound when the handset
is out-of-range from the base if the
RANGE ALARM is set to ON.)
57. CALL WAITING
You must subscribe to Call Waiting
service from your local phone
company in order to enjoy this
convenience.
1. While on a call and there is a new
call coming in, you will hear a short
beep tone in your receiver signifies
a new call is waiting.
2. Press the key once and it will
switch you to the second party and
place the first party on hold.
3. If you want to go back to the first
party, press the key again.
TO END THE FIRST CALL BUT KEEP
THE SECOND (NEW) CALL
1. Press key while on the first call
ends that call.
2. Press key jumps back to the
second (new) call.
3. Press key to end the call.
58. FORWARD AN INCOMING CALL
FROM HANDSET 1 TO HANDSET 2
1. On Handset 1, press the PAGE key
and then press “2” on the keypad.
This pages Handset 2 while putting
the outside call on HOLD.
2. When Handset 2 rings, press
key on Handset 2 to answer the
45
