Daewoo DTC-29G1 Instruction Manual Download Page 15

15

USEFUL TELETEXT FUNCTIONS

INDEX (   ) button (A18): Allows you to return directly to the initial tele-
text page.

SUBPAGE (   ) button (A10):

-  Press the SUBPAGE button (A10). In the extreme top left corner, ins-

tead of the page number, ‘’S. . . .’’ will be displayed. This is ready to ac-
cept the subpage number.

-  Enter directly the subpage number you want with the remote control 

NUMBER 0..9 buttons (A3): for example to request the 2nd subpage, 
type 0002.

-  After a few seconds the subpage number is replaced by the page number 

in the header. You can press again SUBPAGE button (A10), to display 
the subpage number.

-  If the requested page is not immedietly available the rolling header 

will be active until the page arrives.

Warning:

  If the subpage is not available (does not exist), then the header 

will roll continuously and no new page will be found.

Note :

  Teletext specification allows for subpage numbers 0000 to 3979 

(the first figure is limited to the range 0..3, and the third figure 
0..7).

PAGE HOLD button (   ) (A9): Any teletext page or subpage can be held 
on the screen by pressing the PAGE HOLD button. 
-  The page number shown in the extreme top left corner instead of page 

number the HOLD icon is shown in green. 

-  Press the HOLD button again to cancel hold mode (the page number 

will return to white).

REVEAL (   ) button (A24): Press this button to reveal, on certain pages, 
hidden information such as the answer to a quiz. 
- Press the button again to hide the information.

Summary of Contents for DTC-29G1

















Reviews: