Daewoo DTB-21U7 S, Instruction Manual, Page: 6 / 14

Front
Rear
VIDEO GAME
CAMCORDER
OR
ST ART U P
LANGUAGE MENU
The very first time that you turn on the TV, the LANGUAGE menu will appear on the screen. It
'
s purpose
is
to select the language that will be used for all the OSD (On
Screen Display) menus. The user must enter a choice of language before proceeding further.
The language entered at this stage can still be modified at any later time, by entering the FEATURES menu (see later section under MENU DESCRIPTION).
The descript
ions
used in the menu are those of the country code (e.g. GB = English, RUS = Russian etc).
C O N N EC T IN G EX T ERN AL EQ U IPMEN T
Selection is made by use of the remote control CURSOR UP (A6)) / CURSOR
DOWN (A21) keys and CURSOR RIGHT (A20) / LEFT (A7) keys.
Once you are satisfied with your selection, push the OK button (A18) to confirm
your choice, after which the menu will disappear. The menu will never appear
again.
VCR / DVD / Video Game / Pay-TV decoder
AV1
ANT
AV2
This socket (C1) has video / audio inputs and outputs
It is
recommended
to connect to this socket automatic AV switching
equipment such as pay-TV
decoders, video games, DVD players and
most VCR’s.
In most cases, when connecting powered equipment to this socket, the
TV set switches automatically to AV mode. If not, then use the TV/AV
buttons (A5) or(B7) to select AV1.
This socket (C2) has video / audio inputs and outputs
(Note : DTB-21U7 NS has no
sound outputs and sound input is common with front socket AV3). Automatic AV
switching equipment (for example most VCR’s) can be connected to
this socket.
In most cases, when connecting powered equipment to this socket, the
TV set switches automatically to AV mode. If not, then use the TV/AV
buttons (A5) or (B7) to select AV2.
You can also receive an S-VHS signal with REAR SCART2 socket, by
selecting SVHS2 with the TV / AV buttons (A5) or (B7).
REAR SCART 1 SOCKET (AV1)
REAR SCART 2 SOCKET (AV2)
Allows to switch between TV and
external modes.
By repeatedly pressing the remote
control TV / AV (A5) or the TV front
panel TV / AV (B7) button, the on-
screen display is changed as shown
AV1 > AV2 > SVHS2 > AV3 >
TV
FRONT AV SOCKET (AV3)
The front AV socket (B2) -
(B3) has audio and video
inputs. To switch from TV
to these inputs, use the TV
/ AV buttons (A5) or (B7)
and select AV3.
To hear TV sound with
headphones, insert a
3.5mm headphone plug
into the headphone socket
(B4). The speaker’s sound
will be automatically cut
off.
HEADPHONE SOCKET
The rear Scart 1 (C1), Scart 2 (C2) sockets and the front AV socket (B2) (B3) are three dedicated sockets to connect audio-video equipment.
TV/AV SELECTION
PR
PR
MENU
LANGUAGE
F E DK D CZ
I H GR GB FIN
RUS RO PL NL N
SLO S
5
Important: If your video equipment does not have SCART socket(s),
or if you wish to use only the aerial (RF) connection (not recommended),
then you should make use of PR 00 on the TV set for best performance.
Note : DTB-21U7 NS, sound input is common
with rear SCART2 socket (AV2).
AV1
ANT
AV2