1. IMPORTANT SAFETY INSTRUCTION
Read the instruction manual attentively before use.
Carefully remove the tool and any accessories from the box. Do not discard any of the packaging
materials until all parts are accounted for.
Keep the product in a dry place.
Read all warnings and instructions attentively. Failure to follow all warnings and instructions listed
below may result in electric shock, fire and/or serious personal injury.
Read operator`s manual carefulle. Learn its applications and limitations, as well as the specific
potential hazards related to this power tool. Following this rule will reduce the risk of electric shock,
fire, or serious injury.
Check whether the available power supply parameters correspond to the voltage parameters speci
fied on the tool.
Check whether the power tool and connections are not damaged.
Connect the power cord to the outlet only when the tool is switched off.
Switch on the tool prior you place it on the workpiece.
Take all safety measures to reduce a risk of electric shock. Avoid body contact with earthed or
grounded surfaces, such as pipes, radiators, ranges and refrigerators.
Sudden temperature changes may result in water condensation on live parts. Prior to use: Let the
power tool reach the workplace room temperature.
Do not use machines, tools and recommended accessories for any than intended purposes!
Clamp the workpiece safely. Secure the workpiece to be drilled in a vice or witch clamps to keep it
from turning as the drill bit rotates.
Dress properly. Do not wear loose clothing or jewellery. Loose clothes, jewellery or long hair can be
caught in moving parts. Wear safety shoes and gloves. Contain long hair.
Should dust, chips and sawdust result from activity or should you work above your head, always
wear safety goggles and dust mask, where appropriate.
While impact drilling, wear suitable ear protective equipment.
While working on ladders, scaffolding or upper floors, always stand on a film base.
Do not expose power tool to rain or wet conditions. Do not immerse the tool into water.
When operating a power tool outdoors, use an extension cord and other accessories suitable for
outdoor use.
Do not operated power tools in explosive atmospheres.
When the tool is handed over to the third person, the instruction manual shall always be included.
The power tool can be repaired only by a qualified specialist and with the original spare parts.
WARNING!
Do not use a power tool while you ar tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power tools may result in serious personal
injury. Do not use the power tool in any of the following situations.
Keep the power tool out of reach of children.
Store idle power tools in the original package in a safe place and out of reach of children.
Disconnect the power cord from the power outlet before making any adjustments, changing acces
sories, or storing power tools.
Do not abuse the cord. Never use the cord to carry the charger. Do not pull the cord to disconnect
the power tool from the power source.
When working: Do not let the motor stop if the power tool is loaded.
Keep the workplace clean and tidy. A messy workplace increases a risk of injury!
Do not assume unusual body positions while drilling.
EN
2
Summary of Contents for DSP1100-4
Page 8: ...6 STRUCTURE DIAGRAM 7...