➠
33
Video RSatellite Receiver
9
➠
32
Video RSatellite Receiver
V
ARIOUS
M
ENU
S
ETUP
M
ODE
9
3
HOW TO USE INSTALL LOCK
1) Enter the current password.
2) If you select Parental Lock to ON, install Lock is changed to ON. (If you don’t want
to set the Install Lock ‘ON’, you just change the Install Lock from ‘ON’ to ‘OFF’.)
3) Enter a new password.
(If you do not want to change the password, skip step 3 and go to 5)
4) Confirm your new password by entering the new password again.
5) Exit from this menu, and press the [
] button.
6) Turn on the Digital Satellite Receiver, and press the [MENU] button.
7) Select any menu, and press [OK].
8) The Enter Password box will appear.
9) Enter the password to access the menu.
V
ARIOUS
M
ENU
S
ETUP
M
ODE
SYSTEM SETTING
You can make disc settings on System Setting menu.
“Start on channel” Feature allows you to setup the first
shown channel when you power on the satellite
receiver.
Optional :
If your set has RF Output, you may show 2 additional
menus related to RF channel selection. Default UHF
channel is 40.
COMMON INTERFACE
You can see Slot A, Slot B and the types of the inserted
CAM (Conditional Access Module). You can explore
the sub-menu of the CAM by selecting the slot and
pressing [OK] button. Each kind of CAM has its own
sub menu. So, if you have any questions about the
CAM sub-menu, contact your CAM provider.
FACTORY DEFAULT
The factory default menu will allow you to make the
whole settings to the factory default mode, and will
reboot the receiver. Just press [red] color button on your
remote control. The whole settings and channels you
searched before will be lost.
