background image

2

This Digital PVR has been manufactured to meet international safety standards, but
you must take care to operate it safely. 

It is important that you read these safety instructions.

If you have any doubts about the installation, operation, or safety of this Digital PVR,
contact Daewoo, as shown below.

IMPORTANT CARE AND SAFETY ADVICE

IMPORTANT CARE AND SAFETY ADVICE

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and servicing
instructions in the literature accompanying the
appliance.

Electrical warning 

•  Your Digital PVR contains a high voltage which is sufficient to cause a dangerous electric shock.

•  Never remove the Digital PVR cover.

•  There are no user-serviceable parts inside. 

Switch off the power supply from the mains wall socket. before you disconnect any equipment from
the Digital PVR.

•  Never push anything into holes, slots or other openings in the case.

Positioning the PVR

•  The Digital PVR and cables should be placed so that they not likely to be walked on or pinched by

items placed upon or against them.

•  Do not expose your Digital PVR to direct sunlight or to extreme temperatures (above  40

°C or

below -5°C), high moisture levels or dust.

•  The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,

such as vases, shall be placed on the apparatus.

•  The ventilation should not be impeded by covering the ventilation openings with items,such as

newspapers,table-cloths,curtains,etc.

•  Do not Place the Digital PVR on an unstable surface or on a bed, sofa, rug, or similar surface as this

may block air ventilation and cause it to overheat. 

•  Never place the Digital PVR over a radiator or in an unventilated cabinet. No naked flame sources,

such as candles, should be placed on the apparatus.

0916DSD-9520 

 

2005.9.16 

9:24 

AM 

 

˘

`

2

Summary of Contents for DSD-9520

































Reviews: