99
Connecting the PVR
• Connect a SCART cable between the SCART TV socket on your Digital PVR and your
TV SCART IN socket.
• Connect an RF cable between the ‘RF OUT’ socket on the Digital PVR and the RF
input socket on your VCR.
• If there isn’t already one in place, connect a second RF cable between the RF output
on your VCR and the RF input socket on your TV.
RF IN
RF OUT
L
R
AUDIO
OUT
S/PDIF
OUT
TV
VCR
DVD
100-240V-
50/60Hz, 18W
Manufactuered under license from Dolby Laboratories.
"Dolby" and the double-D symbol are
trade marks of Dolby Laboratories.
DIGITAL TERRESTRIAL RECEIVER
HARD DISC RECORDER
MADE IN UK
SCART Cable
(Not supplied)
RF Cable
AERIAL
TV
SCART Cable
(Not supplied)
VCR
3. Connect the POWER cable.
• Switch on your TV
• Switch on the mains outlet for the Digital PVR.
• Press [POWER] on your PVR remote. The PVR’s green light should go on.
• Your TV should switch to the Digital PVR automatically. If no, select the AV channel
using the button on your TV remote marked AV, EXT, TV/AV, O/E or a symbol, or
refer to your TV manual.
• If you cannot see the picture from the Digital PVR, please refer to the “where to get
more help” section towards the end of this user’s guide.
You are now ready to tune in to the digital TV service.
4. Switch on your TV.
RF Cable
DWBP-B3L1KA-AGN 2007.10.1 4:58 PM ˘
` 9 mac001 1200DPI 90LPI
