25
You can also use the GO TO function and use
the Antenna Direction Help function.
On how to use the GO TO menu, refer to page
20, the GO TO function.
In this section, the Antenna Direction Help
function is described.
If you set enable to some antennas, the
receiver will search enabled antenna mapped
Satellite on Multi-SAT search. (See Channel
Search)
To change the satellite name, press the MENU
key, and select Sat Name Edit.
The Keypad Dialog box will appear. Use the
arrow keys on the remote control to enter the
satellite name.
Antenna Setup
If your antenna is positioned incorrectly, you
can not receive signal from the satellite, even
if you have entered correct values in the
Antenna Setup menu.
The
Digital Satellite Receiver
provides Antenna
Direction Help in order for you to have more
accurate information on the pointing direction
of your antenna.
First, select a satellite name, and the location
of the selected satellite will be displayed. In
case the location of the satellite has changed,
you can reset it with the new location.
Second, enter the Longitude and Latitude
value of your location.
Antenna Direction Help
USER INSTALLATION
