Daewoo DSD-9250E, Service Manual

Page: 27 / 56

26
CIRCUIT OPERATING MANUAL
--- DEVELOP driver configuration ---
[UARTIO fitted]
[UNHOSTED NOT fitted]
[STREPORT fitted]
--- MPEG driver configuration ---
[B_ON_THE_FLY fitted]
[ENABLE_AVSYNC fitted]
[DONT_BLOW_UP_HALF_SIZE_PICTURES NOT fitted]
[BUILT_FOR_16MBIT fitted]
[DECODE_ELEMENTARY_STREAM NOT fitted]
[SIF_UPSAMPLING_WORKAROUND NOT fitted]
2) I2C driver initialized message
I2C driver initialized
3) API Information & Clock Initial
CFG_DRC = 0x2b
PTI driver library v3.0
Link I/F cut 2.x initialized for DVB
Setting up the link i/f interrupt
Clock recovery/PWM init
[PWM_REBASING FITTED]
[PWM_CONTROL_LARGER_VALUE_FASTER_CLOCK FITTED]
[PWM_INITIAL_VALUE: 0x83]
PCR init
4) Tuner Initial
TUNER Module Initialization
Creating TUNER module semaphores ...
module_type = 148 Successfully Installed TUNER module
5) MPEG SDRAM configuration
MPEG SDRAM configuration :
Video Bit Buffer : Size= 400 Kbytes From 0xc0000000 to 0xc0063fff
Audio Bit Buffer : Size= 16 Kbytes From 0xc0064000 to 0xc0067fff
OSD Buffer
: Size= 400 Kbytes From 0xc0068000 to 0xc00cbfff
Frame Buffer A : Size= 608 Kbytes From 0xc00cc000 to 0xc0163fff
Frame Buffer B : Size= 608 Kbytes From 0xc0164000 to 0xc01fbfff
First free address = 0xc01fc000
Total SDRAM used = 2032 Kbytes
SDRAM not used by MPEG = 16 Kbytes
6) MPEG Process & Video Encoder Process Start
STi5518 Encoder configured in PAL BGDHI
Mpeg audio/video synchro process started
Mpeg live reset process started
Setting up the mpeg video interrupt
5518 initialized to parse PES streams
Setting up the mpeg audio interrupt