Daewoo DSC-3210E, Service Manual

Page: 23 / 80

Service manual SC-140
-22-
14 GNDAF SUPPLY Ground, Analog Front-end
15 VSUPAF SUPPLY Supply Voltage, Analog Front-end
16 CBIN IN Analog Component Cb Input
17 CIN1 IN Analog Chroma 1 Input
18CIN2/CRIN IN Analog Chroma 2 Input / Analog Component Cr Input
19 VIN1 IN Analog Video 1 Input
20 VIN2 IN Analog Video 2 Input
21 VIN3 IN Analog Video 3 Input
22 VIN4 IN Analog Video 4 Input
23 TEST IN Test Pin, Reserved For Test
24 HOUT OUT Horizontal Drive Output
25 VSUPD SUPPLY Supply Voltage, Digital Circuitry
26 GNDD SUPPLY Ground, Digital Circuitry
27 FBLIN IN Fast Blank Input
28RIN IN Analog Red Input
29 GIN IN Analog Green Input
30 BIN IN Analog Blue Input
31 VPROT IN Vertical Protection Input
32 SAFETY IN Safety Input
33 HFLB IN Horizontal Flyback Input
34 VERTQ/ INTLC OUT Differential Vertical Sawtooth Output Interlace Control Output
35 VERT OUT Differential Vertical Sawtooth Output
36 EW OUT Vertical Parabola Output
37 SENSE IN Sense ADC Input
38GNDM SUPPLY Ground, MADC Input
39 RSW1 OUT Range Switch1 for Measurement ADC
40 RSW2 OUT Range Switch2 for Measurement ADC
41 SVMOUT OUT Scan Velocity Modulation Output
42 ROUT OUT Analog Red Output
43 GOUT OUT Analog Green Output
44 BOUT OUT Analog Blue Output
45 VSUPAB SUPPLY Supply Voltage, Analog Back-end
46 GNDAB SUPPLY Ground, Analog Back-end
47 VRD IN DAC Reference
48XREF IN Reference Input for RGB DACs
49 AIN3 IN Analog Audio 3 Input
50 AIN2 IN Analog Audio 2 Input
51 AIN1 IN Analog Audio 1 Input
52 AOUT2 OUT Analog Audio 2 Output
53 AOUT1 OUT Analog Audio 1 Output
54 VSUPS SUPPLY Supply Voltage, Standby
55 GNDS SUPPLY Ground, Standby
56 XTAL1 IN Analog Crystal Input
57 XTAL2 OUT Analog Crystal Output
58RESQ IN/OUT Reset Input/Output, Active Low
59 SCL IN/OUT I 2 C Bus Clock
60 SDA IN/OUT I 2 C Bus Data
61 Mute OUT High = Mute active
62 LED OUT High = Green, Low = Red
63 KB IN Local keyboard ADC input
64 OCP IN Over Current Protection input
Pin Name
Type Short Description
PSDIP
64-pin