Daewoo DSB-071AH, Service Manual

Page: 102 / 131

97
PROCEDURES PHOTOS
1. Stop the operation of the Air conditioner and disconnect the power cord
from the wall outlet.
2. Removing the Insert Grille and Frame Grille. (Fig 1~2)
1
Draw up the Insert Grille and remove it.
2
Loosen the screws fixed at the Cover Ter-Block.
3
Loosen two screw at the Frame Grille.
4
Remove the Frame Grille.
3. Removing the Control Box. (Fig 3)
1
Remove room and coil thermistors.
2
Disconnect the fan motor lead wire from connection at the
Control PCB.
3
Disconnect the stepping motor lead wire from connection at the
Control PCB.
4
Remove the select switch from connection at the Control PCB.
5
Loosen the screw fixed at the ground wire.
6
Remove the Control Box
4. Removing the Drain Pan. (Fig 4)
1
Disconnect the Body drain hole. (left and right Body)
2
Disconnect three hooks and remove the Drain Pan.
5. Removing the Indoor Evaporator. (Fig 5~6)
1
Remove the hook fixed at the Plate mounting of the back of Body.
2
Remove Indoor Evaporator.
6. Removing the Cross Flow Fan. (Fig 7)
1
Remove the set screw fixed at the Motor shaft.
2
Remove the Cross Flow Fan.
7. Remove the Motor IDU and the Bearing Plastic.
Fig 1
Fig 3
Fig 4
Fig 5
Fig 6
◆
DSB-183AH/183PH/240A-R/240AH-R/240P-R/240PH-R/F240P-R
DSA-183A-R/183AH-R/240A-R/240AH-R/240AH/240PH
Fig 2
Fig 7