manualshive.com logo in svg

Daewoo DLV-32C7SMB/LMB, Instruction Manual, Page: 32 / 56

Share
Download
Daewoo DLV-32C7SMB/LMB Instruction Manual Download Page 32

Setting Up TV

Stations

31

1. Locate the selection bar on the Favourite.

• Move to 

Programme Edit

in the 

Install

menu. 

• Press the “

¢

¢‚

‚

VOL

¢”

“ buttons.

Favourite

2. Setting up the Favourite

• Move the selection bar to the added/deleted Pr

with “

¡

PR

¡ª

” or “

¢

¢‚

‚

VOL

¢”

“ buttons.

• Add/Delete the Pr with “

Favourite

” buttons.

3. Viewing the Favourite Pr

• Whenever pressing “

Favourite

” button, the Pr

changes as the selected programme order.

- Reveals how strong your DTV signal is and whether you need to adjust your antenna.
- The higher the signal strength, the less likely you are to experience picture degradation.
- Digital TV Signals; May not be available in all areas, nor broadcast all programmes.

Signal Strength (Digital TV mode only)

1. Locate the selection bar on the Signal strength.

• Move to 

Signal strength

in the 

Install

menu. 

• Display the strength status of digital signal.

2. Press the Recall button in DTV mode, then signal

strength is also displayed.

Summary of Contents for DLV-32C7SMB/LMB

























































Reviews:

No comments