4. Connecting to Equipment
-. Connecting to AUDIO & VIDEO
10
DHC-X200/X250
This connection is only for
equipment with a digital optical
audio input. Digital recording is
not always possible; therefore,
also connect to the analog
TAPE/MD OUT(REC) jacks.
Remove the
protective caps
before making
connections. When
not in use, be sure to
replace them.
The OPTICAL INPUT connector is for equipment with a digital
audio output such as a satellite tuner which is to be connected to
analog VIDEO 1 connectors instead of a VCR.
To connect to the OPTICAL INPUT connector, use an optical
fiber connection cable.
If the equipment doesn't have recording functions, you may leave
the analog DIGITAL OUT OPTICAL connectors disconnected.
SCART Jack
: For Europe
optional
Summary of Contents for DHC-X200
