background image

4

Operating Conditions:

This unit is designed to operate with a working environment between 13  and 35 .
If the unit has been switched off and needs to be switched on again quickly, allow approximately

three minutes for the correct operation to resume.

Do not connect the dehumidifier to a multiple socket outlet, which is also being used for other

electrical appliances.

Select a suitable location, making sure you have easy access to an electrical outlet.
Plug the unit into a 115V~  60Hz electrical socket-outlet with earth connection.
Make sure the Water Tank is correctly fitted otherwise the unit will not operate properly.

1. Plug the cord to the proper power requirement. The computer system of the unit will have a 
    self-check.  If it is normal, the POWER indicator flashes at 0.5Hz. Press ON/OFF button now,
    the unit will start  operating under DEHUMIDIFYING mode with 60% setting humidity. Press the
    HUMIDITY           or         button will change setting humidity. 
2. Press the CONTINUE button will go into continues dehumidifying mode, and this time the 
   HUMIDITY               and         button are disable.
3. Press the ON/OFF button to turn off the unit.(You do not meed to unplug the power cord except 
   when the unit will not be in use for a long period of time.)
 

OPERATING INSTRUCTIONS

Turning the unit 

ON

or

OFF

OPERATION

Water Tank

 

Water will drain into the tank. When the tank is full and the unit stops operating,

 the Water Full indicator light will flash. 

 Do not remove the water tank whilst the machine is still working or just stopping. 

 This might cause some water to drip. 

 To empty the water tank, remove the tank as shown, empty the water and replace 

 the tank back in the unit. Ensure components of water tank are correctly positioned.

 The machine will re-start when the water tank is restored in its correct position.

1. Drag out the bucket a little.

2. Hold the two sides of the 
    bucket with even strength,
   and pull it out from the unit.

3. Pour the water out.

Summary of Contents for DHC-250











Reviews: