background image

 
 
 
 
 

 

39

 

 

 

 

 

Use arrow button and select an MP3 title using the SELECT button 

then play will start automatically. When you know the title number, 

enter the MP3 title number using numeric buttons and press the SE- 

LECT button. If you want to play an adjacent MP3 title, press the 

NEXT button for next title and the PREV button for previous title   

during playing.  To select “005 HAVEYOU” MP3 title in this case, 

press the DOWN arrow button twice and press the SELECT button. 

 

Example: 

1. Press the DOWN arrow button ( 

2. Press the DOWN arrow button ( 

3. Press the SELECT button 

 

 

  When you want to view the disc contents in fast forward or fast rev- 

  erse, you can do that by pressing FF/SF button(    ) or  FR/SR button 

  (    ). There are total 6 steps for DVD, 4 steps for VCD and 2 steps for   

CDDA in fast searching. They are FAST 2X, FAST 4X,  FAST 8X, 

FAST 16X, FAST 32X and FAST 64X for both direction. To search   

at FAST 16X in forward direction, press the FF/SF button 4 times   

during play mode. 

 

Example: 

   1. Press the FF/SF button (          ) 

    2. Press the FF/SF button (          ) 

    3. Press the FF/SF button (          ) 

    4. Press the FF/SF button (          ) 

 

 

 

If power is OFF by pressing the POWER button during PLAY or PRESTOP state, play is resumed from the 

point where it was stopped. If you switch OFF by disconnecting AC cord, the machine will start playing from 

the first track or chapter. 

Example: 

   Press the POWER button during play mode or prestop mode. 

 

4-5 Selecting the desired MP3 title 

4-6 Searching 

4-7 Resume Play 

Operating Instructions 

Summary of Contents for DHC - 2300K
















































































Reviews: