Daewoo DH-6100P, User Manual

Page: 45 / 64

44
5
The decoded information appears after
confirmation. You can go back at any time to
change the information by pressing [ENTER].
Select the appropriate input field using [
…†
].
If required, change the information using
[
…†
].
If all the information is correct, press the
[ENTER] button. The programming information
is stored in a TIMER block.
6
Press [SETUP] to exit the Timer Record List.
7
Timer indicator will light or blinking. Power Off
the HDD/DVD Recorder to start the Timer
Recording.
Timer Recording
PR No. Date Start End Mode
PR03 01/02 13:30 14:30 HQ
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
Instructions
Enter-Edit Setup-Exit Move
…†
Edit Timer
Media
PR No.
PR-03
Date Jan/02 Sun
Start 13:30
End 14:30
Mode HQ
Repeat Once
Delete
Instructions
Enter-Save Setup-Exit
VideoPlus is not available for some countries.
You can clear a Timer Recording any time before
the recording actually starts.
• Use [
…†
] to select the program you want to
erase on the Timer Recorder List, then press
[ENTER] to modify it. Use [
œ √
] to select
'Delete' then press [ENTER].
Or just press [CLEAR] on the Timer Recorder
List.
Canceling a Timer Recording
After a Timer Recording has started, you can still
cancel the program by pressing and holding [STOP]
for 5 seconds.
Stopping a Timer Recording in
Progress
Even if a Timer Recording is set, the HDD/DVD
Recorder will not record if:
• No disc is loaded.
• A non-recordable disc is loaded.
• ‘Lock Disc’ is set to ON in the DISC Settings
menu; see page 54.
• There are already 49 titles recorded on the disc
or 254 titles recorded on the HDD.
You cannot enter a Timer Recording if:
• A recording (dubbing, copying also) or playing
titles is already under way.
• The start time has already passed.
• Eight Timer Recordings have already been set.
If two or more Timer Recordings overlap:
• The earlier program takes priority.
• When the earlier program finishes, the later
program starts.
• If two programs are set to start at exactly the
same time, the program entered first takes
priority.
Confirmation is not possible when:
• The DISC Lock setting is set to ON.
• There are already 49 titles recorded on the disc
or 254 titles recorded on the HDD.
If the disc is damaged, the recording may not
complete successfully, even if the Check field
shows ‘Rec. OK‘.
Timer Recording Troubleshooting
Recording Priority
• Timer Recording and OTR (One Touch Record)
have the same priority but they have lower
priority than manual recording. During manual
recording, Timer Recording or OTR will be
ignored.
Cooling fan continues to work when Timer
recording is set and VPS/PDC is turned ON,
because HDD/DVD Recorder have to get time data
from the station.
Timer Recording
DG-M12D1P-SA(GB) 2005.10.20 5:12 PM ˘ ` 44 mac001 1200DPI 100LPI
Downloaded From Disc-Player.com Daewoo Manuals