RECORDING
49
You can record from an external component, such as
a camcorder, VCR or Digital Camera, connected to
any of the DVD Re VCR’s external inputs.
1
Make sure the component you want to record
from is connected properly to the DVD
Re VCR; see pages 15~18.
2
Use [PR+/–] or [INPUT] to select the external
input to record from.
3
Load a recordable disc or tape.
When you load a new, blank recordable disc
(DVD±RW, DVD±R), the recorder will take a
moment to initialise it for recording.
4
Set the desired Recording mode by pressing
[REC MODE] repeatedly.
5
Press [REC (
●
)] once.
Recording will start. The REC indicator lights on
the front panel display.
Recording continues until you press [STOP] or the
disc is full.
To record for a fixed length of time, see ‘One
Touch Record‘ on page 43.
6
Press [STOP (
■
)] to stop recording.
Recording from External Components
You can record from a digital camcorder connected
to the DV IN jack on the front panel of the DVD
RVCR.
You can use the DVD RVCR remote to
control both the camcorder and the DVD
RVCR.
1
Before recording, make sure your digital
camcorder is connected to the front panel DV
IN jack; see page 18.
2
Press [INPUT] repeatedly to select the DV
input.
DV appears on the front panel display and the TV
screen.
Recording from a Digital Camcorder
•
If your source is copy-protected, you will not be
able to record it using the DVD Re
VCR. See ‘Copyright Notice‘ on page 7 for
more details.
Recording from an External Input
Recording from an External Input
3
Find the place on the camcorder tape from
which you want to start recording.
For best results, pause playback at the point you
want to start recording. Depending on your
camcorder, you can use the DVD RVCR
remote to control the camcorder using the STOP,
PLAY, and PAUSE functions.
4
Press [REC] once to start recording.
Recording is automatically stopped if the DVD
RVCR detects no signal. You can pause
or stop the recording by pressing [PLAY/PAUSE]
or [STOP]. You cannot control the camcorder
from the remote control during recording.
The source signal must be DVC SD format.
Some camcorders cannot be controlled using the
DVD RVCR remote.
If you connect a second DVD recorder using a DV
cable, you cannot control the second recorder from
this one.
You cannot control the DVD RVCR
remotely from a component connected to the DV IN
jack.
You cannot record date and time information from a
DV cassette.
DF-4501PV only
DF-H3512P-UL¿ 2008.1.25 5:21 PM ˘
` 49 mac001 1200DPI 100LPI
