10
16. Take off the tub insulat ion over the dishwasher tub.
17. Reverse the above procedure to install.
Removal and Replacement
1. Disconnect power.
2. Remove the Outer Door.
3. Remove the 6 screws that connect the control panel cover to the
dishwasher door. (See electronic controller, step 3)
4. Close the dishwasher door.
5. Release the door latch and allow the control panel cover to hang
against the dishwasher door.
6. Disconnect the wire terminals fro m PCBs.
7. Disconnect the 2 terminal lugs from the
Door Switch and Latch
Assembly
.
8. Disconnect the 4 terminal lugs from the power switch.
9. Disconnect the 4 terminal lugs from the
Dispenser
switch.
10. Remove the bolt, nut, and ground wire from the door.
11. Pull the wire harness from the door.
Door Assembly
Summary of Contents for DDW-M1212
