EN
10
BOTTOM OF SET
Battery compartment for 1.5 volt (2X AA/ LR6/ UM-3) battery 2pcs. (not included) for temporary
time storage.
SET TIME
1. Rotate “RADIO/ TIME SET/ AL1 SET/ AL2 SET” knob to “TIME SET” after the unit is plugged.
2. Rotate “VOLUME/HOUR” knob to select 12/24 hours and press “ NAP/SLEEP/ ENTER” to
confi rm setting.
mean 24 hours. mean 12 hours.
3. Rotate “VOLUME/HOUR” knob to change hours down or up.
4. Rotate” TUNING/MIN” knob to change minutes down or up.
5. Press “ NAP/SLEEP/ ENTER” to validate.
LISTEN TO FM RADIO
For better reception, fully extend and adjust the position of the FM antenna wire.
1. Rotate the “RADIO/ TIME SET/ AL1 SET/ AL2 SET” knob to “ RADIO” after the unit is plugged.
2. Press / FUNCTION” to turn on FM radio.
3. Rotate the “TUNING/MIN” knob to tune to a radio station.
STORE FM RADIO STATIONS
You can store up to 20 FM radio stations in preset channel automatically or manually.
STORE FM RADIO STATIONS AUTOMATICALLY (AUTO SCAN)
1. Setting to the FM radio mode, press the “SNOOZE/DOMMER/AUTO SCAN” for two seconds.
- The received stations are automatically stored to preset numbers.
- [P 01 ~ P 20] is preset station numbers. The radio can store to 20 FM radio station at most,
If the stored radio is full, it will jump to P01 radio play.
2. Press “Al1/PRESET” to select the automatically stored station from P01 to P20.
STORE FM RADIO STATIONS MANUALLY.
1. Tune to a FM radio station.
2. Press “AL2/MEMORY” button to activate the storage mode.
3. Rotate “TUNING/MIN” to select the preset number.
- [P 01 ~ P 20] is preset station numbers.
4. Press “AL2/MEMORY” button again to confi rm the station number.
- To remove a pre-stored FM radio station, store another station in its place.
LISTEN TO A PRESET FM RADIO STATION
Press “AL1/PRESET” to select a preset number.
