EN
11
To
Connect via Bluetooth
Enter sleep mode (10 to 90
minutes)
Change music (for USB and
Bluetooth)
Do this
Press and hold down “
►▌▌
/
” button (8) to
connect.
Indicator “D” will blink. Select “DAEWOO DCR-460”
on phone / music player.
Indicator “D” will stop blinking when connected
and short beep will be played.
With the radio on, press “SNOOZE NAP/SLEEP”
button (11) to enter sleep mode. (Indicator G will
be on).
Control through phone / music player “
►▌▌
/
”
button (8) to play, pause “TUN+/
►►▐
” button
(10) to skip to next track / fi le “
▐ ◄◄
/TUN-” button
(9) to go back to previous track / fi le.
Bluetooth
NOTES
Please replace all batteries at the same time with only new batteries. Remove
all batteries when the clock radio is not in use for extended periods of time.
Place the clock radio only on protected furniture. Avoid direct sunlight and any
area that may be exposed to water or moisture.
DO NOT PLUG THE RADIO INTO AN ELECTRICAL OUTLET IF YOU ARE UNSURE OF
THE VOLTAGE.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. Other trademarks
and trade names are those of their respective owners
PRODUCT DISPOSAL
Attention should be drawn to the environmental aspects of battery disposal.
Don’t throw used batteries in dustbin. Please contact your retailer in order
to protect the environment. Electrical products should not be disposal of
with household waste. Please recycle where facilities exist.
GUARANTEE
This product is guaranteed against all manufacturing defects for 2 years
from the date of purchase. If the care advice and instructions contained in
this manual are not followed the guarantee will be automatically void.
For this guarantee to be valid, it is necessary to present the original
receipt or invoice. Industrias Masats S.L.U.., www.fl amagas.com.
