ENG
14
IMPORTANT NOTES
Avoid installing the unit in locations described below:
• Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.
• Dusty places.
• Places subject to constant vibration.
• Humid or moist places.
POWER SOURCES
This unit operates with AC 220-240V~50Hz or 6 x DC1.5V “C” (UM-2) batteries. Do not attempt
to operate the unit on any other power source. You could cause damage to the unit and void
your warranty.
Please be sure the power outlet you plug this unit into is working and receives constant
(unswitched) power.
AC OPERATION
1. When the AC power cord (included) is connected to the AC Power Socket on the back of
the unit and the other end is plugged into a AC 220-240V~50Hz wall outlet, the unit will
disconnect the batteries automatically, and operate on AC Power only.
2. Press the “ ” button once to power on, press and hold the “ ” again to power off !
3. Press the “MODE” button switch to “FM” or “USB” or “CARD” or “AUX” mode.
BATTERY OPERATION
1. Remove the BATTERY DOOR.
2. Install 4 x DC1.5V “C” (UM-2) batteries (not included) according to the polarity diagram
inside the battery compartment.
3. Close the BATTERY DOOR.
IMPORTANT:
Be sure that the batteries are installed correctly.
Wrong polarity may damage the unit and void the warranty.
For best performance and longer operating time, we recommend the use of good quality
alkaline-type batteries.
CAUTION
1. Do not mix old and new batteries.
2. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
3. If the unit is not to be used for an extended period of time, remove the battery. Old or
leaking battery can cause damage to the unit and may void the warranty.
4. Do not dispose of batteries in fi re, batteries may explode or leak.
BATTERY REPLACEMENT
When the output sound of this unit becomes distorted, the batteries are weak. You need
to replace all the exhausted batteries at the same time as soon as possible to avoid battery
leakage.