Daewoo DBU-34, User Manual

Page: 17 / 37

ENG
17
- Reorient the appliance to get better AM reception.
GENERAL OPERATION
PLAY / PAUSE Press to start playing CD / MP3 disc.
Press again to stop playing CD / MP3 operation temporarily.
Press again to resume playback.
SKIP + & Press to go to the next track or back to the previous track.
SKIP - Press and hold while playing until you fi nd the point of the
sound.
STOP
Press to stop all CD / MP3 operation.
PLAYBACK
1. Set the “FUNCTION” selector to “CD / MP3 / USB” mode.
2. Open the CD door and place a CD / MP3 disc with the label up in the CD compartment.
3. Close the CD door.
4. Focus search is performed if disc is inside.
For CD disc - Total number of tracks is read and appears on the display.
For MP3 disc - “MP3” appears on the display.
5. Press the “PLAY / PAUSE” button to start playing CD / MP3 disc.
6. Adjust the “VOLUME” control to the desired level.
7. Press the “PLAY / PAUSE” button again when you want to stop playback temporarily.
8. Press the “STOP” button when fi nished.
CD / MP3 OPERATION
PROGRAM
Up to 20 tracks of CD disk, 99 tracks of MP3 disc can be programmed for disc play in any
order.
Be sure to press the “STOP” button before use.
1. Press the “MODE” button, the display will show “P01” and fl ash.
2. Select desired track by using the “SKIP +” or “SKIP -” button. ( You may select a desired
album by pressing “ALBUM” button. )
3. Press the “MODE” button again to confi rm desired track into the program memory.
4. Repeat step 2 and 3 to enter additional tracks into the program memory.