- 20 -
Carefully keep away dust or
foreign articles not to be entered into
injection pump when adjusting injection
timing.
¥
Checking Procedure
1) Align the crankshaft pulley TDC mark with the
pointer.
Remove the inspection hole cover at the front of
the injection pump on the timing gear case cover.
Check the alignment between the pointer (4) on the
injection pump gear nut lock plate and the
projection area mark (3) on the injection pump gear
case.
If it is in misalignment, recheck with turning the
crankshaft pulley one more turn to repeat the
foregoing procedure to align the mark.
Check the alignment of the notched lines (1) and
(2). (These notched lines were aligned at the plant
to set injection pump body and mounting flange.)
2) Turn the crankshaft pulley counterclockwise about
30ûcrankangle.
3) #1 plunger of injection can be visually sured when
disconnecting injection pipe.
EJM1035S
EJM1038S
3
4
EJM1039I
EJM1054I
1.5.10. Injection Timing
Summary of Contents for D50S-2
