6
30 Inch Tower Fan
Model COL1602
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
3.
Once the
Stand
(5) is assembled, position it
so that the mains cable is at the back of the
fan then push it onto to base of the fan until
all four clips click home.
As the stand is attached to the fan, guide the
mains cable through the cord guide keep the
cable firmly in place and prevent the power
cable twisting or being caught during use.
Setting Up Your Tower Fan
1.
Place the fan into the desired position ensuring that it is on a solid, even surface
and vertical.
2.
Ensure that the
Timer Control
(7) is set to the
‘
ON
’
position and the
Speed/Oscillate Control
(6) is set
to the ‘0’ position.
3.
Insert the mains plug into the nearest socket.
Using Your Tower Fan
Fan Speeds
The fan has three speeds:
Speed 1 - Low Speed
Speed 2 - Medium Speed
Speed 3 - High Speed
Fan Only Mode
For Fan only mode, rotate the
Speed/Oscillation
Control
(6) anticlockwise to the desired speed on the
LEFT-HAND
side of the control. The fan will start
blowing air in stationary mode.
Fan and Oscillation Mode
For Fan and Oscillation mode, rotate the
Speed/Oscillation Control
(6) clockwise to the
desired speed on the
RIGHT-HAND
side of the
control. The fan will start blowing air and oscillate
from side to side.
Back of the
Fan