9
2 in 1 Personal Air Purifier
Model No. COL1573
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Fan Speed Button
(8)
1.
Press the
Fan Speed Button
(8) to power up the unit, it will beep once, then the
Fan Speed 1 Indicator
(7) will light.
2.
Press the
Fan Speed Button
(8) to adjust the fan speed, select from 1 Low, 2
Medium or 3 High speed.
For Low speed, the Fan Speed Indicator 1 will light.
For Medium speed, the Fan Speed Indicators 1 and 2 will light.
For High speed, all Fan Speed Indicators 1, 2 and 3 will light.
3.
To switch the unit off, press the
Fan Speed Button
(8) to step through the fan
speeds until the unit switches off, or alternatively, hold the button down for 2
seconds.
Air Purifier Button
(9)
1.
Press the
Air Purifier Button
(9) to turn on the
Air Purifier Fan
(2) and the UV
lamp inside and the the
UV Indicator
(6) will light to sterilise the filter.
2.
Press the
Air Purifier Button
(9) again to turn the Air Purifier mode off.
Replacing the Filter
•
It is recommended to replace the HEPA filter every 3 months. It may vary
depends on the air quality and usage time.
•
Before replacing the filter, make sure the appliance is turned off and
unplugged. Replace the filter by following
Installing Filter
section.
Filter Information
Replacement filters are available by telephoning 0161 831 5248 (9.00am-5.00pm
Monday-Thursday, 8.00am
–
4.00pm Friday) or contacting us via the website:
Cleaning and Maintenance
•
Always disconnect the Air Purifier from the mains supply before cleaning.
•
Do not immerse the appliance into water or any liquid.
•
Do not use abrasive, corrosive, or flammable cleaners such as bleach or
alcohol, to clean any part of the appliance.
•
Do not use a vacuum cleaner to clean the filter or wash it.
•
The filter can be sterilized by placing in sunlight.
•
If you do not intend to use the Air Purifier for a long time, store the appliance
in a cool and dry environment.
