6
36 Inch Tower Fan with Remote
Model No. COL1571
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Description of Parts- Remote Control
Assembling Your 36 Inch Tower Fan
The stand of the tower fan comes in two parts, which fit around the base of the
fan with the power cord exiting through the hole in the centre of the stand.
Before assembly, place a cloth or similar underneath it to prevent damage to the
outer casing.
1.
Remove the large stand retaining nut from the base of
the fan by unscrewing anti-clockwise as shown right:
2.
Left: Ensure that the mains cable is
threaded through the centre of the stand
then lay the left hand section (a) of the
stand on top of the right hand section (b)
and clip the two halves together until the
stand is complete as below:
17. Power On/Off Button
18. Fan Speed Button
19. Timer Button
20. Oscillate Button
21. Mode Button
22. Battery Compartment
17
18
19
20
21
22
a
b
