7
Bladeless Fan & Heater
Model: COL1550
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
How Your Bladeless Fan works
Heating is provided by two ceramic PTC elements
which are located either side of the
Air Outlet
(1).
Operating Instructions
Fan Mode
•
Place the fan & heater on a solid, dry, level, heat resistant surface.
•
Insert the
Mains Plug
(6) into a socket and switch the socket on (if applicable).
•
Touch the
Power On/Off Button
(12) or the corresponding button
on the
Remote Control
(7)
–
arrowed right, to power up the fan.
•
Set the speed level to the desired setting by touching the
Speed
Control Button
(11), the speed setting can be selected from 1 (low
speed) to 10 (high speed).
If using the
Remote Control
(7) press to reduce the speed and
to increase the speed accordingly.
•
The
Display
(8) will show the speed setting chosen from 1 to 10.
Oscillation
To make fan oscillate from side to side, press the
Oscillate Button
(10), to turn off
oscillation press the
Oscillate Button
(10) again.
If using the
Remote Control
(7) press the for oscillation and press again
to cancel.
The bladeless fan works by pulling air in through the
Air
Inlet
(3) which then forces the air up through the
Main Body
(2) and round in a circular motion before being pushed out
through the
Air Outlet
(1).
