5
Before the first time you use your Speaker
Please read these operating instructions thoroughly and keep them in a safe place for future
reference.
Remove all packing materials and discard responsibly.
Charging the internal Battery
Before use, please ensure that the internal rechargeable battery is fully charged as follows
:
1.
Insert the
Micro USB Plug
(12) of the
USB Charging Cable
(11) into the
Micro USB DC Port
(8) on rear
panel of the Speaker to charge the internal battery.
2.
Insert the large USB plug on the other end of the
USB Charging Cable
(11) into a suitable USB charger
rated at 5 volts 1 amp minimum.
3.
The LED Indicator
(5) will light red to show the internal battery is charging. Once the battery is fully
charged, the
LED Indicator
(5) will go out showing that the internal battery is fully charged and the
USB Charging Cable
(11) can be removed.
NB
the Speaker can be used normally during charging.
Operating Instructions
Using the Bluetooth Mode
1.
Press and hold the
Power/Play/Pause/Phone
button
(3) for three seconds to power up the
speaker.
2.
The LED Indicator (5) will quickly flash blue.
3.
Enable the Bluetooth mode on your Phone, Tablet or other Bluetooth compatible device and set it to
search.
4.
Select ‘
AVS1398
’ from the search results found by your device which will now pair with the speaker.
Once the device has paired with the speaker the speaker will chime.
5.
Enable the music player on your Phone, Tablet or other device you are using.
6.
Press the
Power/Play/Pause/Phone
button (3) to start and stop (pause) the connected device
playing.
7.
Use the Skip Back
▬
(4) and Skip Forward
+
buttons (1) to change the track being played.
8.
Press and hold the Skip Back
▬
(4) and Skip Forward
+
buttons (1) to decrease and increase the
volume level.
9.
Alternatively use your devices controls in the usual manner.
Using the AUX/LINE Input
The AUX/LINE Input allows a direct wired connection of an external audio device (such as a mobile
phone, music player, etc.) via a 3.5mm jack socket input on the rear Panel.
1.
Press and hold the
Power/Play/Pause/Phone
button
(3) for three seconds to power up the
speaker.
2.
Insert a suitable 3.5mm jack lead into the
AUX
socket (7) on the connection panel of the Speaker.
3.
The speaker will automatically detect the lead and switch to AUX mode. Alternatively press the
M
button (2) until the AUX input is selected.
4.
Insert the other end of the lead into the device you are playing from.
Summary of Contents for AVS1398
Page 1: ...1 Bluetooth Speakers...
