5
Before the first time you use your Bluetooth Speaker
Please read these operating instructions thoroughly and keep them in a safe place for future
reference.
Remove all packing materials and discard responsibly.
Charging the internal Battery
Before use, please ensure that the internal rechargeable battery is fully charged as follows
:
1.
Insert the
Micro USB Plug
(13) of the
USB Charging Cable
(12) into the
Micro USB DC Port
(10) on
rear panel of the Speaker to charge the internal battery.
2.
Insert the large USB plug on the other end of the
USB Charging Cable
(12) into a suitable USB charger
rated at 5 volts 1 amp minimum.
3.
The
LED Indicator
(2) on the top panel will light red to show the internal battery is charging. Once the
battery is fully charged, the
LED Indicator
(2) will go out showing that the internal battery is fully
charged and the
USB Charging Cable
(12) can be removed.
NB
the Speaker can be used normally during charging.
Operating Instructions
Using the Bluetooth Mode
1.
Press and hold the Power button (3) on the Top Panel for three seconds to power up the speaker.
2.
The
LED Lights
(8) on the top panel will flash to show the speaker is powering up.
3.
Enable the Bluetooth mode on your Phone, Tablet or other Bluetooth compatible device and set it to
search.
4.
Select ‘
AVS1364
’ from the search results found by your device which will now pair with the speaker.
Once the device has paired with the speaker the LED lights (8) and the LED Indicator (2) will flash
slowly and the speaker will chime.
5.
Enable the music player on your Phone, Tablet or other device you are using.
6.
Press the
Play/Pause/Phone
button (1) to start and stop (pause) the connected device playing.
7.
Briefly press the
Skip Back
▬
(7) and
Skip Forward
+
buttons (4) to change the track being played.
8.
Press and hold the
Skip Back
▬
(7) and
Skip Forward
+
buttons (4) to decrease and increase the
volume level.
9.
Alternatively use your devices controls in the usual manner.
Using the AUX/LINE Input
The AUX/LINE Input allows a direct wired connection of an external audio device (such as a mobile
phone, music player, etc.) via a 3.5mm jack socket input on the rear Panel.
1.
Press and hold the Power button (3) on the Top Panel for three seconds to power up the speaker.
2.
Insert a suitable 3.5mm Jack to Jack lead (14) into the
AUX
socket (9) on the rear panel of the
Speaker.
3.
The speaker will automatically detect the lead and switch to
AUX
mode.
4.
Insert the other end of the lead into the device you are playing from.
