background image

2

WARNING

: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE 

THIS APPLIANCE TO RAIN OR MOISTURE.

  CAUTION :

TO REDUCE THE RISK IF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS 
INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE 
PRESENCE OF UNINSULTED "DANGEROUS VOLTAGE"

 

WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE 
SUFFICIENT  MAGNITUDE TO CONSTITUTE A RISK OF 
ELECTRIC SHOCK TO PERSONS.

THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE
PRESENCE OF IMPORTANT OPERATING  AND MAINTENANCE 
(SERVICING) INSTRUCTIONS IN THE LITERATURE 
ACCOMPANYING THE APPLIANCE.

CAUTION

  TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC    
  PLUG WITH AN EXTENSION CORD, RECEPTACLE  OR OTHER OUTLET  
  UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE 
  EXPOSURE.

LASER SAFETY

  THIS UNIT EMPLOYS A  LASER. ONLY QUALIFIED SERVICE  PERSONNEL 
  SHOULD REMOVE THE COVER OR ATTEMPT TO SERVICE THIS DEVICE 
  DUE  TO POSSIBLE EYE INJURY.

  CAUTION :

 USE OF ANY CONTROLS, ADJUSTMENTS,  OR PROCEDURES 

  OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
  RADIATION EXPOSURE.

CAUTION :

 TO PREVENT  ELECTRIC SHOCK, MATCH WIDE BLADE OF 

PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION :

  POUR EVITER  LES CHOCS  ELECTRIQUES, INTRODUIRE 

LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON-
DANTE   DE LA   PRISE ET  POUSSER JUSQU'AU FOND.

Important Safety Instructions

- All the safety and operating instructions should be read before   

the appliance is operated.

- The safety and operating instructions should be retained for 

future reference.

- All warnings on the appliance and in the operating instructions 

should be adhered to.

- All operating and use instructions should be followed.
1.  Water and Moisture - The appliance should not be

 

used near 

water - for example, near a bathtub, washbowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool,
and the like.

2.  Carts and Stands - The appliance

should be used only with a cart or
stand that is recommended by th
manufacturer.

3.  An appliance and cart combination 

should

 

be moved with care.

 

Quick 

stops, excessive force, and uneven

 

surfaces may cause the appliance 
and

 

cart combination to overturn.

4.  Wall or Ceiling Mounting - The appli-

ance

 

should be mounted to a wall or

 ceiling

 

only as recommended by the

 

manufacturer.

5.  Ventilation - The appliance should be situated so

 

that its 

location or position does not interfere with

 

its proper 

ventilation.  For example, the appliance

 

should not be situated 

on a bed, sofa, rug, or

 

similar surface that may block the 

ventilation

 

openings; or, placed in a built-in installation, such

 

as a bookcase or cabinet that may impede the flow

 

of air 

through the ventilation openings.

6.  Heat - The appliance should be situated away from

 

heat 

sources such as radiators, heat registers,

 

stoves, or other 

appliances (including amplifiers) that

 

produce heat.

7.  Power Sources - The appliance should be

 

connected to a 

power supply only of the type

 

described in the operating 

instructions or as marked

 

on the appliance.

8.  Grounding or Polarization - The precautions that

 

should be 

taken so that the grounding or

 

polarization means of an 

appliance is not defeated.

9.  Power - Cord Protection - Power-supply cords

 

should be 

routed so that they are not likely to be

 

walked on or pinched 

by items placed upon or

 

against them, paying particular 

attention to cords at

 

plugs, convenience receptacles, and the 

point where

 

they exit from the appliance.

10.Protective Attachment Plug - The appliance is equipped with 

an attachment plug having overload

 

protection.  This is a 

safety feature.

 

See Instruction Manual for replacement or 

resetting of

 

protective device. If replacement of the plug is 

required, be sure the

 

service technician has used a 

replacement plug

 

specified by the manufacturer that has the 

same overload protection as the original plug.

11.Cleaning - The appliance should be cleaned only as

 

recommended by the manufacturer.

12.Power Lines - An outdoor antenna should be located

 

away 

from power lines.

SAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCKS

DO NOT OPEN

PORTABLE CART 

Figure 2

Summary of Contents for AMI-910L






























Reviews: