Model Names 907D 907DF
English - 8
English - 9
SPECIFICA
SPECIFICA
TIONS
TIONS
Mode
H.Freq (KHz) V.Freq(Hz)
Remark
VGA 480
640
X
480
31.5
60
Non-interlaced
VGA 400
720
X
400
31.3
70
Non-interlaced
VESA 43K
640
X
480
43.3
85
Non-interlaced
VESA SVGA 85
800
X
600
53.7
85
Non-interlaced
VESA 60K
1024
X
768
60.0
75
Non-interlaced
VESA 1024/85
1024
X
768
68.7
85
Non-interlaced
VESA 1280/75
1280
X
1024
80.0
75
Non-interlaced
VESA 1280/85
1280
X
1024
91.1
85
Non-interlaced
Resolution
(dots
X
lines)
CDT Size
19-inch
19-inch DynaFlat
Diagonal visible image area
18-inch 18-inch
Dot Pitch
0.25 mm
0.24 mm
Synchronization Horizontal
30 - 95 KHz
Vertical
50 - 160 Hz
Plug and Play
VESA DDC Compatible
Power Saving
EPA, VESA DPMS, Nutek Compliant
Power Source
100-240 Vac, 50/60Hz (Free Voltage)
Power Consumption
120 W
Dimension-W x H x D
444 x 459 x 460 mm
444 x 459 x 458 mm
(set with stand)
Weight-unpacked(lbs/Kg) 40.8/18.5 45.6/20.7
Operating Temperature
10 ~ 40°C /50 ~ 104°F
When the monitor doesn’t display, if you press any key, Self
Diagnosis screen is displayed. The Self Diagnosis function
checks if the status of the monitor is No Signal or Out of range.
No Signal screen is displayed when the
D-Sub signal connector is not connected
or the status of the monitor is on DPMS
mode.
Out of Range screen is displayed when
the applied frequency is under or over
normal range.
Normal range
H : 30 - 95 KHz
V : 50 - 160 Hz
Reset the screen to the Factory Preset
Display Settings.
Display a RGB Color Bar to determine
whether the screen color is expressed
normally or not.
TEST PATTERN
RECALL
Display horizontal & vertical frequency
and polarity.
STATUS
POWER SAVER
YES : VESA DPMS operation.
NO : NO DPMS operation.
ICON CONTROL FUNCTION
SELF DIAGNOSIS
F
F
ACTOR
ACTOR
Y PRESET TIMINGS
Y PRESET TIMINGS
Degaussing keeps the monitor free from
unwanted magnetism that can result in
color impurity.
DEGAUSS
The specification can be changed without any prior notice to improve
the quality of the product.