35
Time Lapse Video Cassette Recorder
34
Time Lapse Video Cassette Recorder
Setting the SW Out Terminal Output
Synchronization pulses for multiplexer can be obtained
from the SW OUT terminal.
1
Press the MENU button, to display the initial MENU.
2
Press the SHIFT
button to move the arrow mark
(
) to SW OUT Terminal Set.
3
Press the SHIFT
button to display the SW OUT
TERMINAL SET menu.
4
Press the SHIFT
button to set “FIELD” (or
“FRAME”).
• With each press of the SHIFT
button, the setting will
change as indicated below.
5
Press the SHIFT
button, to select Timing.
6
Press the SHIFT
button to set the “TIMING”.
• AUTO . . . When you connect with external equipment,
the field will be switched automatically.
• FIELD . . . 1 pulse is output after each set number of
fields. (VHS mode, 2H, 6H)
• FRAME . . 1 pulse is output after each set number frames.
(VHS mode, 2H, 6H)
7
Press the MENU button, the normal screen is
displayed.
• The setting procedure is now complete.
✔
• If “TIMING” is set to
FRAME (see step 6),
“FRAME” will be indicated
instead of “FIELD”.
• In case of TimeLapse
mode, refer to the
“Recording Speed” Table
of page 14.
Dew Sensor
When the extreme moisture condensation occurs inside
of TimeLapse Recorder, the drum of recorder rotates and
“E-05” appears on the display panel. This means that
about 20 minutes is necessary for drying out of the
moisture condensation. After 20 minutes, this dew sensor
mode is released.
* To exit from the dew sensor mode by force, press the
RESET key on the rear panel.
