Daewoo 3220L, Service Manual

Page: 20 / 86

Service manual SC-150
-19-
Horizontal scaling ( 0.25 to 4 )
Panoramavision
Black-level expander
Dynamic peaking
Soft limiter (gamma correction)
Colour transient improvement
Programmable RGB matrix
Analogu e RGB/Fastblank input
Half-contrast switch
Picture frame generator
Scan velocity modulation output
High-performance H/V deflection
Angle and bow correction
Separate ADC for tube measurements
EHT compensation
4-1-3- -Controller
8-bit, 10-Mhz CPU (65C02)
96 kB program ROM on chip
1 kB program RAM on chip
memory banking
16-input, 16-level interrupt controller
patch module for 10 ROM locations
two 16-bit reloadable timers
capture compare module
watchdog timer
14-bit PWM for voltage synthesis
Four 8-bit PWMs
10-bit ADC with 15:1 input MUX
I2C bus master interface
24 programmable I/O ports
80C51 -controller core standard instruction set and timing
1 s machine cycle
32-128Kx8-bit late programmed ROM
3-12Kx8-bit Auxiliary RAM (shared with Display and Acquisition)
Interrupt controller for individual enable/disable with two level priority
Two 16-bit Timer/Counter registers
WatchDog timer
Auxiliary RAM page pointer
16-bit Data pointer
IDLE and Power Down (PD) mode
14 bits PWM for Voltage Synthesis Tuning
8-bit A/D converter
4 pins which can be programmed as general I/O pin, ADC input or PWM (6-bit) output
4-1-4- Teletext Features
Four programmable video inputs
Adapt ive data slicer
Signal quality detection
WS T, PDC, VPS, and WSS acquisition