24
* PRE WASH PROGRAM
1
Put the laundry in the drum. Put detergent and softener into the detergent case.
Then close the door.
• Put detergent into the main wash and prewash compartments in the detergent
case. Softener should be below the ‘MAX’ level.
• Put detergent into the pre wash compartment only if you want to add prewash.
• When you want to use bleach, put it into the main wash compartment with
detergent.
2
Press the Power button.
• The LED shows only ‘-- --’ and all Program Lights turn on.
3
Select the 'PRE WASH' program using program selection dial.
• If you press Start/Pause button after power button without selecting program, the
'PRE WASH' program is selected as default program.
• Pre wash + main wash and '2' time rinse and '800rpm' spin and washing
temperature '40℃' are selected automatically.
• If you want to change washing temperature, the spin velocity, press each button.
4
Press Start/Pause button.
• The Door is locked. By sensing the weight of laundry and supplying wash water,
The appliance starts washing.
NOTE
• If you want to change the setting during operation, press the Start/Pause button to hold the operation
and press the button you want.
• ‘Cold’, ‘20’ °C, ‘40’ °C, ‘60’ °C and ‘95’ °C washing temperatures are selectable with Pre wash program.
CAUTION
• If you select washing temperature ‘95’ °C, some cold water is supplied before the drain of main wash.
This is to protect the user from the hazard of burn injury by lowering the temperature of hot wash water
instead of directly draining it. Therefore this is not a malfuction.
(Be careful with the draining water, since it can be still hot although the temperature is lowered.)
WF*3V************(영)_규격용.indd 24
16. 5. 16. 오전 9:38