4
REMOTE CONTROL TRANSMITTER FOR CD PLAYER
CONTROL FUNCTIONS
Button Description
The remote control requires 3V for operation.
PLAY/PAUSE
- In CD mode, press once to start playback. Press once again to stop the
disc play temporarily.
STOP
- Press to terminate CD playback.
SKIP
- Press once to skip to previous track.
SKIP
- Press once to skip to next track.
REPEAT
- In CD mode, press to enable repeat play.
PLAY/PAUSE
-SKIP+
PROGRAM/REPEAT
STOP
-SKIP+
PROGRAM/
REPEAT
STOP
PLAY/PAUSE
* Switch off unit by function selector to Tape.
PRECAUTIONS CONCERNING BATTERIES
B. RECORDING FROM CD
•
SET FUNCTION SELECTOR TO "CD" POSITION.
•
INSERT A CASSETTE SUITABLE FOR RECORDING, PRESS PAUSE KEY THEN PRESS RECORD
KEY. RECORDING FUNCTION WILL BE ON STAND BY.
•
ACTIVATE THE CD PLAYER, AND THEN PRESS (TO RELEASE) PAUSE KEY TO START RECORDING.
•
TO STOP RECORDING, FIRST PRESS STOP BUTTON ON CD PLAYER - THEN PRESS THE STOP
/ EJECT KEY ON TAPE DECK.
• Be sure to insert the batteries with correct positive “+” and negative “-“ polarities.
• Use batteries of the same type. Never use different types of batteries together.
• When the remote control unit is not in use for a long time (more than a month), remove the
batteries from the remote control unit to prevent them for leaking. If they leak, wipe away the liquid
inside the baterry compartment and replace the batteries and never dispose of old batteries by
throwing them in a fire.
Battery Installation
1. Remove the battery compartment cover.
2. Insert 2 x AAA dry batteries
• Make sure that the batteries are inserted with their positive “+” and negative “-“ poles positioned
correctly.
3. Close the cover until it clicks.
• If the distance required between the remote control unit and main unit decreases, the batteries
are exhausted. In this case replace the batteries with new ones.