DAEWOO ELECTRONICS KOR-63050S, Service Manual

Page: 14 / 26

DISASSEMBLY AND ASSEMBLY
7. To remove magnetron
(1) Remove a screw which secure the magnetron.
(2) Remove the magnetron.
(3) Reverse the above steps for reassembly.
NOTE
Never install the magnetron without the metallic gasket plate which is packed with each magnetron to prevent
microwave leakage. Whenever repair work is carried out on magnetron, check the microwave leakage. It shall not
exceed 4mW/cm
2
for a fully assembled oven with door normally closed.