DAEWOO ELECTRONICS KOR-616T0A, Service Manual, Page: 7 / 57

6
When the oven door is opened, the light turns
off.
The oven door can be opened at any time
during operation by touching the door release
button on the control panel. The oven will
automatically shut off. To restart the oven,
close the door and then touch START.
Each time a pad is touched, a BEEP will
sound to acknowledge the touch.
The oven automatically cook on full power
unless set to a lower power level.
The display will show “ :0” when the oven is
plugged in.
Time clock returns to the present time when
the cooking time ends.
When the STOP/CLEAR pad is touched
during the oven operation, the oven stops
cooking and all information retained. To erase
all information (except the present time), touch
the STOP/CLEAR pad once more. If the oven
door is opened during the oven operation, all
information is retained.
If the START pad is touched and the oven
does not operate, check the area between the
door and door seal for obstructions and make
sure the door is closed securely. The oven will
not start cooking until the door is completely
closed or the program has been reset.
Wattage output chart
• The power-level is set by pressing the M/W pad. The chart shows the display, the power level and the
percentage of power.
( ) : For KOR-616T
OPERATION PROCEDURE
1
2
3
4
5
6
7
8
This section includes useful information about oven operation.
1. Plug power supply cord into a 120V 60Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray. The glass
tray must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
Make sure the oven is properly installed and
plugged into the electrical outlet.
Touch Power pad,
Power Level (Display)
Approximate Percentage
Once the Touch of Power
5 800W (600W) 100%
4 650W (500W) 80%
3 450W (350W) 60%
2 300W (250W) 40%
1 140W (100W) 20%