9
once
HI
100%
twice
70%
70%
3 times
50%
50%
4 times
20%
20%
5 times
00%
0%
POWER LEVEL pad.
Power Level (Display)
Approximate Percentage of Power
The oven light is on when the microwave oven
is operating or the door is opened.
The oven door can be opened at any time
during operation by opening the door. The oven
will automatically stop working.
Each time a pad is touched, a BEEP will sound
to acknowledge the touch.
The oven automatically cooks at full power
unless set to a lower power level.
All segments of the display will turn on when the
oven door is closed and it is first plugged in.
When the oven is just plugged in at first or the
display is turned off, the key pads are not
activated. After oven door is opened and closed
once, the oven is ready to work showing
"HELLO" shows in the display.
When STOP pad is touched during the oven
operation, the oven stops cooking and all
information retained.
To erase all information, touch STOP pad once
more. If the oven door is opened during the
oven operation, all information is retained.
If START pad is touched and the oven does not
operate, check the area between the door and
door seal for obstructions and make sure the
door is closed securely.
The oven will not start cooking until the door is
completely closed or the program has been
reset.
This section includes useful information about oven operation.
1. Plug power supply cord into a standard 240V AC 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it in the oven.
3. Shut the door. Make sure that it is firmly closed.
4. Set required programme and time, then touch stert.
5. Once cooking is complete, take care removing container as it will be hot.
OPERATION PROCEDURE
1
2
3
4
5
6
7
8
Make sure the oven is properly installed and
plugged into the electrical outlet.
WATTAGE OUTPUT CHART
• A power level is selected by touching the POWER LEVEL pad. The chart shows the display, the power
level and the percentage of power.
