DAEWOO ELECTRONICS E1032D, Service Manual

Page: 8 / 36

Service Manual
7
Service Manual
6. Factory/Service OSD Menu and Adjustment
6.1 To enter the Factory OSD Menu
a. With factory RC (remote control)
1. Press "MENU" "1" "1" "4" "7" button and enter factory mode.
2. Press “ ▲ / ▼ ” button select the function menu,
press “ ◄ / ► ” button enter factory OSD Sub menu and adjust values
in the menu.
3. Press “MENU” or "EXIT" button exit factory Sub menu and OSD main menu.
6.2 Factory OSD Menu
6.2.1 White Balance
Note: Different source has different WB values. Before adjusting, please
change to desired source.
1. Auto Color
For VGA and Component Video sources, WB values must be adjusted. And at others
signal sources, the
“auto colour “does not work.
Before adjusting, prepare the signal instruments such as Chroma2329 first, and
find the video picture with gray and color bars. Then please change to desired source.
Notes:
a、Press "
MENU" "1" " "1" "4" "7"
button and
enter factory mode.
b、Press
“ ▲ / ▼ ”
button Select the item “ADC
Adjust”.
c、Press
“
►
”
button and enter factory OSD Sub
menu..
d、Press
“ ▼ ”
button Select the item “Auto Color”.
e、Press
“ ►
”
button auto color.
NO
source Timing Pattern Notes
1 ADC VGA 1920*1080 32 gray For VGA source
2 ADC HDTV 1080P 32 gray For Component Video