27
FUNCTIONS OF THE CONTROL PANEL
Power Button
Press this switch to turn the power on or off.
Start/Pause Button
Operation and temporary stop is repeated as it is pressed.
When you want to change program in operating;
Press the ‘Start/Pause’ button
ᵎ
Select the program that you want to change
ᵎ
Press the ‘Start/Pause’ button again.
Temperature Button
It can be used to adjust temperature of water according to types of the load to be
washed. As the button is pressed, temperature of water is selected by
Cold
ᵎ
30°C
ᵎ
40°C
ᵎ
60°C
ᵎ
95°C
Spin Speed Button
By pressing the spin button, the spin speed can be chosen.
Rinse Hold
• Is selected by pressing the spin button repeatedly. This function
leaves clothes in the machine; suspended in the water after a
rinse without entering into spin.
• To proceed through to a drain or spin, after the Rinse Hold
function is completed, use spin button.
Spin Only
• If you want only spin, you can operate spin only.(See page 24.)
Option Button
Pre-Wash
• The washer operates one additional wash and spin before the
main wash.
• If the laundry is heavily soiled, Pre-Wash course is effective.
• Pre-Wash is available in Cotton, Baby Care and Synthetic
programs.
Rinse+
• Is used to add a rinse, which may assist in removing traces of
detergent residue.
• By selecting Rinse+ function, the rinse time and the rinse water
are increased.
Water+
• If you want to use more water in the rinsing, press this button.
■
DWD-HC102*/HC122* SERIES
