DAEWOO ELECTRONICS DWD-HB1411 Service Manual Download Page 25

24

FUNCTIONS OF THE CONTROL PANEL

ADD+ Button

By pressing this button, you can decrease pre-set washing time to 10 minutes.
Time save is available in Cotton, Cotton Eco and Synthetic.

Time Delay Button

If you want to reserve the finishing time of washing, use this button.
If the Time Delay button is pressed, '2:00' is displayed. The maximum delayed time
is 12:00 hours and the minimum time is 2:00 hours.
Each pressing of the button advances on time delay by one hour.

Child Lock Button

If you want to protect any accident occuring from handling of washer by a child, use
this function.
Child Lock can be set by pressing 'Time Save' and 'Time Delay' buttons simulta-
neously during 2~3seconds.

* When Child Lock is set, no button functions except Power button.

To cancel Chid Lock, press 'Time Save' and 'Time Delay' buttons simultaneously
again.
To change to the desired program, while in child lock mode.
1. Press both 'Time Save' and 'Time Delay' buttons together once again.
2. Press the Start/Pause button.
3. Select the desired program and press the Start/Pause button again.

Program Dial

When Start/Pause button is pressed, the Cotton program is automatically selected.
By turning right the Program Dial, the program is selected in order of 'Cotton 

Hand Wash 

↔ 

Delicate 

↔ 

Wool 

↔ 

Quick 30 

↔ 

Drain 

↔ 

Rinse+Spin 

↔ 

Cotton Eco 

↔ 

Synthetic'.

Change
the desired
program

Summary of Contents for DWD-HB1411





































Reviews: