28
9. DISASSEMBLY INSTRUCTIONS
1
Before service of
1. Stop the unit, remove the power cord from the receptacles.
any part.
2. Move the unit to the safe location for the suitable work.
2
Ass’y Fan Motor
1. Remove Front Grill
- Fan Motor
- Open the inlet grille downward by pulling out the both side of the inlet grille.
- Propeller Fan
- Remove screws(2 point).
- Blower Fan
2. Remove the unit from Cabinet .
- Remove screws (2 point) from the unit’s sides.
- Pull the unit from cabinet.
3. Remove Scroll upper
4. Remove plate scroll.
- Remove screws (3 point) from plate scrolls sides.
5. Remove Ass’y Control Box
- Remove screws (3 point).
- Remove wires in the each components.
6. Remove wires in the Panel Housing.
7. Remove screws (7 point) from Ass’y Fan Motor’s sides.
- Ass’y Fan Motor is assembly of Fan Motor, Propeller and Blower Fan, Orifice
and Panel Housing.
8. Lift the Ass’y Fan Motor from the unit.
9. Remove Hex-nut (2 point) from the shaft of Fan Motor.
10. Remove Propeller Fan from the shaft of Fan Motor.
11. Remove Blower Fan from the shaft of Fan Motor.
12. Remove Fan Motor from Panel Housing.
- Remove screws (4 point).
3
Ass’y Control Box
1. Same as the procedure 1 to 5 in the Item 2.
- Panel Control
- Main Pcb
- Front Pcb
- Capacitor
- Power Cord
4
O.L.P
1. Same as the procedure 1 to 2 in the Item 2.
2. Remove Terminal Cover from Compressor.
- Remove hex-nut (1 point).
Please refer to the chapter 10 (Exploded diagram and parts list).
Summary of Contents for DWC-084R
