manualshive.com logo in svg

DAEWOO ELECTRONICS DPM-42A1GCSB, Service Manual

Share
Download
DAEWOO ELECTRONICS DPM-42A1GCSB Service Manual Download Page 84

1. Checking for No Picture

A screen doesn’t display at all and condition of black pattern or power off.

(1) Check whether the CTRL B/D LED(D12, D13, D14) is turned on or not.
(2) Check the power and signal cable of CTRL B/D.
(3) X B/D, Y B/D, Z B/D is well plugged in.
(4) Check the connection of X B/D, Y B/D and Z B/D to CTRL B/D. 
(5) Measure the output wave of X, Y, Z B/D with oscilloscope(more than 200MHz) 

and find the trouble of B/D by comparing the output wave with below figure.

- Measure Point fo Y B/D : TP(Waveform on Y DRV B/D)
- Measure Point fo Z B/D : TP(Bead B28)

(6) Check the SCAN(Y side) IC
(7) Check the DATA(X side) TCP IC
(8) Replace the CTRL B/D.

. Trouble Shooting

     

 

 

 

   

 

 

     

 

 

 

   

 

 

 

   

 

 

 

   

   

 

 

 

     

 

 

 

   

 

 

     

 

 

 

 

   

 

 

Summary of Contents for DPM-42A1GCSB

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands