4
and local codes and ordinances is required.
z
Do not kink or pinch the power supply cord between the ice maker and cabinet.
z
The appliance is to be connected to the water mains using new hose-set and that
old hose-sets should not be reused.
z
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similar qualified person in order to avoid a hazard.
z
The plug must be accessible after installation.
z
All horizontal runs of drain lines must have a fall of 2cm per meter.
z
It is important for the ice maker to be leveled in order to work properly. You may
need to make several adjustments to level it.
z
All installations must be in accordance with local plumbing code requirements.
z
Make certain that the pipes are not pinched or kinked or damaged during
installation.
z
Check for leaks after water line and drain line connection.
z
Never allow children to operate, play with or crawl inside the ice maker.
z
Although the unit has been tested at the factory, due to long-term transit and
storage, the first batch of cubes must be discarded.
z
Never turn the water supply tap off when the ice maker is working.
z
If the ice maker will not be used for a long time, before the next use it must be
thoroughly cleaned. Follow carefully any instructions provided for cleaning or
use of sanitizing solution. Do not leave any solution inside the ice maker after
cleaning.
z
DO NOT touch the condenser fins. The condenser fins are sharp and can be easily
damaged.
z
DO NOT use solvent-based cleaning agents or abrasives on the interior. These
cleaners may transmit taste to the ice cubes, or damage or discolor the interior.
z
The ice machine cleaner contains acids. DO NOT use or mix with any other
solvent-based cleaner products. Use rubber gloves to protect hands. Carefully
read the material safety instructions on the container of the ice machine cleaner.
z
Do not use this apparatus for other than its intended purpose.
SAVE THESE INSTRUCTIONS
Electrical Connection
For personal safety, this appliance must be properly grounded. The power cord of
this appliance is equipped with a grounding plug that mates with a standard
grounding wall outlet to minimize the possibility of electric shock hazard from the
appliance. Have the wall outlet and circuit checked by a qualified electrician to
make sure the outlet is properly grounded. When a standard 2-prong wall outlet is
encountered, it is your responsibility and obligation to have it replaced with a
properly grounding wall outlet. The ice maker should always be plugged into its
own individual electrical outlet which has a voltage rating that matches the rating
label on the appliance. This provides the best performance and also prevents
All manuals and user guides at all-guides.com