Fitting a new plug
The mains lead must be connected as shown below. The wires are coloured
with the following code -
Brown wire = Live (L), Blue wire = Neutral (N),
Green & Yellow = Earth (E).
•
The Blue wire must be connected to the terminal marked N or coloured Black.
•
The Brown wire must be connected to the terminal marked L or coloured Red.
•
The Green and Yellow wire must be connected to the terminal marked E or
coloured Green.
•
Check that there are no cut or stray strands of wire inside the plug.
•
Use a 5 Amp BS 1362 fuse, only use BSI or ASTA approved fuses.
•
If you are in any way unsure which plug or fuse to use, always refer to a
qualified electrician.
•
After replacing or changing a fuse on a moulded plug, the cover must be refitted
to the plug; the appliance must not be used without a fuse cover.
WARNING: Do not wrap the cord around the heater for storage.
Connect
Brown to
Live (L)
Connect
Green &
Yellow to
Earth (E
)
Connect
Blue to
Neutral (N)
Ensure the outer sheath of the mains
lead is securely held by the cable clamp
