Daewoo electricals HEA1187, Manual

Page: 3 / 8

before it is cleaned and whilst being repaired.

Repairs to electrical appliances should only be performed by a qualified
electrician. Improper repairs may place user at serious risk.

Do not operate this appliance with a damaged plug or cord, after a malfunction
or after being dropped or damaged in any way.

Regular, periodic checks should be carried out on the mains cable to ensure
no damage is evident. Should there be any signs of damage the appliance
should not be used.

If the power cable is damaged, it should only be replaced by the manufacturer
or a suitable qualified after-sales-service in order to avoid a hazard

Do not allow the mains cable to hang over sharp edges or come in contact with
hot surfaces.

Do not run the mains cable under carpets, rugs, etc.

Allow the unit to cool before storage.

Before cleaning, disconnect the appliance from the mains supply and allow to
cool.

Never place the appliance near to flammable material or high pressure
containers. (e.g., Paper, wood, petrol, solvents, spray canisters etc.)

This appliance is intended for household use only and should not be used for
industrial purposes.

Do not use any accessories or attachments with this appliance other than those
supplied or recommended by supplier.

Do not use this appliance for anything other than its intended use.

Do not push objects into any openings as damage to the appliance and/or
electric shock may occur.

Ensure appliance is situated in an open area, do not allow it to come in contact
with Cupboards, Curtains, wall coverings, clothing or other flammable
materials.

The appliance should not be installed in areas which have a fire-risk, such as
garages, stables or wooden sheds; this is applicable also for rooms in which
highly inflammable gasses or dust can develop. Danger of fire!!

Even at the lowest setting level the unit is in use. In order to switch off the frost
protector pull out the power plug.

Unplug after each use. Grasp the plug, not the cord.
NB
During the first few minutes of initial use, you may notice a slight
odour and a little smoke. This is normal and will quickly disappear, It is
the coating applied to the heating elements to prevent any corrosion
during transit.