1)Press the power touch key to turn on (off) the power;
2) Program setting, the user may according to the clothing quality and the clothing quantity
choose the program. Click the "program" touch key (Extra dry, Smart dry, Airing, 30mins, 60mins,
90mins), the program indicator lights up in turn, and accompanied by the touch key tone, after
the selection, the indicator light is no longer flashing.
3) Three heating modes (optional) only can be choosed in 30mins, 60mins and 90mins three
programs), the user can choose Full heating , Half heating , Airing the three modes by cycle
selection according to the quality of the clothes lights go on intrude and the touch program
with the touch key tone, selected. Light is not blinking.
4) Press the ”Start” touch key, the dryer will start after 2 seconds; then press this touch key
again, the dryer will pause ruler can reset program, also can be in this status to open the door
to regulate clothes, open the door to be careful of hot steam, to avoid scalding. Press again,
the dryer restart and continues to complete the selected program. The start touch key is the
start and pause switch for the dryer. If you turn on the power and press the "start" touch key
directly, the dryer will run the Smart dry program.
5) the Children lock function, after the dryer starts and running, press the “Program ” +
“Start ”key for about 2 seconds at the same time, the buzzer sends out the confirmation tone,
and the child lock on the display screen blinks and lights up or goes out. To prevent children
misuse. Again, press the two touch key at the same time, the Children Lock is canceled.
The default state of each program
：
’
’
Extra
Airing
30min
60min
90min
Smart
Airing
①
Power On / Off
②
Start / Pause
③
Program (including Extra dry, Smart Dty,
Airing,30mins, 60mins,
90mins)
④
Heating ( Full ,Half ,Airing three heating modes)
Extra
Full
Half
Smart
Airing
Airing
Start
Program
Heat
Power
